Custom Plastic Tray Inserts
Thermoformed PET, rPET and PVC trays, clear or flocked, with a cavity formed to your product. The retail-grade option when the item has to be seen and stay put.
When Plastic Is the Right Answer
A thermoformed tray is a sheet of plastic heated and pulled over a mould. The result is a thin, rigid shell with a cavity that holds the product exactly — visible from every angle, precise to a fraction of a millimetre, and rigid enough to stop a bottle leaning inside a gift box.
It is also the least defensible choice on sustainability, which is why we quote it honestly against the alternatives. Plastic earns its place in three situations: the product must be visible without opening the pack, the pack is opened and closed repeatedly at retail, or the cavity tolerance is tighter than paper can hold.
- PET / PETG — clear, strong, widely recycled; the default for retail display trays.
- rPET — 30–100% recycled content, same performance, and the version to specify if the pack carries an eco claim.
- PVC — cheapest and easiest to form, but not recyclable in most curbside streams; we quote it only when cost is the deciding factor.
Four Tray Constructions
The forming is the same across all plastic tray inserts. What changes is the surface, the colour and how the product is retained.
Clear PET tray
Flocked tray
Opaque printed tray
rPET tray
Plastic Tray vs Foam vs Pulp vs Card
Plastic wins on visibility and precision, loses on recycling. This is the comparison we put in front of buyers before they choose. If paper wins on your project, the same cavity drawing can be quoted in molded pulp, EPE foam or cardboard.
| Plastic tray | EPE foam | Molded pulp | Card platform | |
|---|---|---|---|---|
| Product visibility | Full — clear shell | None | None | None |
| Cavity precision | ±0.3 mm | ±1 mm | ±0.8 to 1.5 mm | ±1 mm |
| Recycling | PET and rPET yes, PVC no | Specialist points only | Curbside paper stream | Curbside paper stream |
| Reuse at retail | Good — rigid and wipeable | Poor — crumbles | Fair — can chip | Poor — creases |
| Tooling | Mould per shape | Die only | Mould per shape | Die only |
| Best for | Retail display, beauty, electronics | Transit protection | Eco-led brands | Light products, gift sets |
Plastic Tray Specifications
Forming tools for plastic tray inserts are cheaper than pulp moulds and much cheaper than injection tools, which is why short runs are viable.
| Material | PET, PETG, rPET (30–100% recycled), PVC |
| Sheet thickness | 0.3–1.5 mm depending on load and cavity depth |
| Forming | Vacuum forming, pressure forming for sharp detail |
| Tolerance | ±0.3 mm on cavity dimensions |
| Surface | Clear, coloured, flocked, anti-scratch coated |
| Printing | Screen print, hot stamping, label |
| Retention | Cavity fit, snap tabs, finger notch, ribbon pull |
| Tooling | Aluminium or resin mould, 7–10 days |
| Minimum order | 1,000 units |
| Production | 20–30 days after sample approval |
| Recycling note | Specify PET or rPET; PVC is not recyclable in most streams |
Choosing the Sheet
The sheet decides clarity, strength and what the customer can do with the tray afterwards.
PET and PETG
rPET
PVC
Where Trays Are Specified
Retail environments where the product has to be visible, and repeated handling has to leave the pack looking new.
- ✓Cosmetics and fragrance sets
- ✓Watches and jewellery
- ✓Consumer electronics and earbuds
- ✓Beauty gift sets
- ✓Pen and stationery sets
- ✓Medical and diagnostic kits
- ✓Collector and limited editions
- ✓Sample and tester packs
Finishing and Retention
Small details on plastic tray inserts decide whether the packer can load 500 units an hour or 200.
From Cavity to Tray
Forming plastic tray inserts is fast; the cavity design is where the time goes.
Send the product
A 3D file or the product itself. We model the cavity with the clearance the material needs.
Check the render
A 3D view of the tray and how the product sits, before tooling is cut.
Sample the tray
A physical formed sample to test fit, retention and lid clearance.
Produce and ship
20–30 days after approval, nested and palletised with the cartons.
Plastic Tray FAQ
Sometimes, and we will say so. A plastic tray makes sense when the product must be visible or the cavity tolerance is tighter than paper can hold. If neither applies, molded pulp or a folded card insert does the same job with a better recycling story — we quote both so you can compare rather than assume.
A clear tray shows the product from every angle and suits window cartons. A flocked tray is coated with a velvet-like fibre, usually black, which hides scuffs, stops the product sliding, and gives a premium feel — standard for watches and jewellery where the tray is seen but the product is lifted out.
Yes for this application. Tray sheet is formed at low stress, so 100% rPET performs like virgin PET in clarity, impact and forming depth. The only practical difference is a very slight colour shift in thick sections, which is invisible at 0.5–0.8 mm.
Far less than a pulp mould or an injection tool — usually a few hundred dollars per cavity, which is why 1,000-unit runs are viable. It is a one-off and stays with the project.
Yes. Send the tray or a photo with dimensions and we will reverse-engineer the cavity and match the sheet thickness. We will also flag if the original over-specifies material, which often reduces the unit price.
1,000 units per cavity, produced in 20–30 days after sample approval. Tooling adds 7–10 days at the front, so the total from approval of drawings to delivery is typically 30–40 days.
Related Inserts
The plastic-free tray for the same cavity, at a lower recycling cost.
Your Trusted Custom Packaging Manufacturer
One-stop custom packaging service from design to global delivery — ISO 9001 certified, 100% recyclable materials, samples in 3–5 days
End-to-End Service
From concept development and structural design to sampling and mass production — all under one roof
100% Recyclable Materials
All materials are eco-friendly, supporting circular economy and carbon-neutral goals
Rapid Turnaround
Samples ready in 3–5 days. Accurate quote within 8 hours of design confirmation
10+ Years of Expertise
Serving 50+ countries with a professional team and 3M+ annual production capacity
Free Design Support
Professional structural design and graphic design recommendations at no extra cost
ISO 9001 Certified
Rigorous quality management system ensures consistent excellence across every batch
Work with Us
At Ecofriendpack, we believe in building strong partnerships that drive mutual success. Whether you’re looking to source eco-friendly packaging solutions or collaborate on innovative projects, we’re here to help.
Email Us
layne@ecofriendpack.com
Call Us
WhatsApp: +86 13559252073
REQUEST A QUOTE
Share your requirements, and we’ll provide tailored solutions at competitive prices.
