Ecofriendpack logo
Ecofriendpack

Eco-friendly Box Design and Production

Custom Molded Pulp Inserts

Wet-press and dry-press pulp trays moulded to your product in bagasse or recycled paper. Plastic-free, curbside recyclable, and sampled before tooling is committed.

Pulp Is the Only Insert That Recycles With the Box

Molded pulp is paper fibre shaped in a mould. Slurry is pressed onto a tool, dried, and comes out as a rigid tray that fits the product and the carton at the same time. Because it is the same material as the box, the whole pack goes into one recycling stream with nothing to separate.

Two processes produce two very different surfaces. Wet-press gives a smooth face on one side and a soft, textured back — the classic egg-box look. Dry-press gives sharper detail, tighter tolerances and a more engineered appearance, at a higher tooling cost. We quote both and tell you which one your product actually needs.

  • Wet-press — smooth outer face, rounded edges, lower tooling cost, best for cosmetic and food presentation.
  • Dry-press — sharper cavities and tighter fit, for electronics and anything with a flat face that must not rock.
  • Material — bagasse (sugarcane), recycled newsprint or bamboo fibre, all FSC or recycled-certified.

Four Pulp Constructions

The mould decides the shape; the construction decides how the tray sits in the box and what it costs.

Full tray

A single moulded tray filling the carton base, with one or more cavities. The most protective and the most common.

Top and bottom pair

Two matching trays that close around the product. Used for bottles, jars and anything tall that needs support at both ends.

Corner blocks

Four small moulded corners that hold the product by its edges. Minimal fibre, maximum air, and a very light pack.

Pulp and card hybrid

A pulp tray under a printed card sleeve. The fibre protects, the card carries the brand — cheaper than moulding a printable surface.

Pulp vs Foam vs Plastic vs Card

Pulp is rarely the cheapest and rarely the most protective. It wins when the recycling claim has to survive a customer opening the box.

Molded pulpEPE foamPlastic trayCard platform
RecyclingPaper stream, curbside, no separationSpecialist points onlyPET yes, PVC noPaper stream, curbside
ProtectionMedium — rigid, cracks on a hard dropHigh, absorbs impactHigh but rigidLow, positioning only
Tooling costHighest of the fourDie onlyMould per shapeDie only
Tooling lead time10–15 days for the mouldNone7–10 daysNone
Surface finishTextured, mouldedSmooth or flockedGloss or matte, printablePrintable
Best forEco-led brands, cosmetics, electronicsFragile, heavy, high valueRetail display, reusable kitsLight products, gift sets

Molded Pulp Specifications

Tooling is the main cost of molded pulp inserts, so the conversation starts with quantity and shape complexity.

ProcessWet-press (smooth face) or dry-press (sharp detail)
MaterialBagasse, recycled newsprint, bamboo or mixed recycled fibre
Thickness1.5–4 mm wall depending on process and load
Tolerance±1.5 mm wet-press, ±0.8 mm dry-press
ColourNatural fibre, or dyed black, kraft and custom shades
PrintingUsually none; brand carried by a card sleeve or label
ToolingAluminium mould, one per cavity, 10–15 days
Minimum order1,000 units (3,000+ for economic dry-press)
Sampling3D render, then a physical sample from the mould
Production20–30 days after sample approval
SustainabilityFSC or recycled fibre, compostable, plastic-free
placeholder

Which Fibre

The fibre changes the colour, the surface and the strength of molded pulp inserts. It rarely changes the price much.

Bagasse

Sugarcane pulp, a waste stream from sugar production. Light natural colour, smooth when wet-pressed, and the most common choice for cosmetics and food.

Recycled newsprint

Grey, slightly speckled, and the cheapest fibre. Strong in dry-press form but shows fibre variation, so it suits industrial and electronics packaging rather than gift packs.

Bamboo fibre

Longer fibre than bagasse, so thinner walls hold more load. A darker natural tone and a premium feel, used where the tray is visible on opening.

Where Pulp Fits

Products that need protection and a plastic-free claim at the same time.

  • ✓Cosmetics and skincare jars
  • ✓Consumer electronics
  • ✓Small appliances
  • ✓Bottles and glass containers
  • ✓Tea, coffee and food gift sets
  • ✓Candles and home fragrance
  • ✓Subscription boxes
  • ✓Retail display packs
placeholder

Finishing Options

Molded pulp inserts are moulded, not printed. Branding comes from the mould shape, the fibre colour or a separate printed element.

Natural fibre finishDyed pulp colourSmoothed wet-press faceTextured dry-press faceDebossed logo in the mouldCard sleeve wrapPrinted labelFinger notchRibbon pullStacking lugs

From Shape to Mould

Pulp has the longest tooling path of any insert, so the sequence for molded pulp inserts matters more than elsewhere.

01

Review the shape

Send the product or a 3D file. We check draft angles and wall thickness — deep, straight cavities are not mouldable in pulp.

02

Approve the render

A 3D render of the tray in the box, before any tooling is cut. This is where most design changes happen.

03

Cut the mould and sample

Mould in 10–15 days, then a physical sample so you can test fit, drop and lid clearance.

04

Produce and ship

20–30 days after approval, nested for freight so pallets are not half air.

Molded Pulp FAQ

Both, in most markets. The tray is unfilled paper fibre, so it goes into normal paper recycling alongside the carton, and it breaks down in industrial composting. If the tray is dyed, check your local stream — natural and black are the safest choices for a curbside claim.

Wet-press forms the tray against a heated mould, which gives one smooth face and rounded edges but looser tolerances. Dry-press forms the tray then presses it in a separate tool, producing sharper detail and ±0.8 mm accuracy at roughly double the tooling cost. Choose dry-press when the product has a flat face that must not rock.

It depends on cavity count and size, and we quote it per project rather than publishing a number — a single small cavity and a four-cavity electronics tray are very different tools. Tooling is a one-off, and it stays with the project on reorders.

Up to about 3 kg with a 3 mm wall and a well-shaped cavity. Above that we use a thicker wall, add ribs, or switch to a two-part top-and-bottom construction so the load is carried by the mould rather than a single flat panel.

Not directly in a way that looks retail-grade. Branding is normally carried by a printed card sleeve, a label, or a debossed logo formed into the mould. We will tell you if a printed surface is essential — in that case a card or plastic insert usually costs less than trying to print pulp.

1,000 units for wet-press, 3,000+ for dry-press to make the tooling worthwhile. Production runs 20–30 days after sample approval, with 10–15 days of that being the mould itself.

Related Inserts

Compare all four families before committing to a material.

Higher protection for fragile or heavy products.

The cheapest recyclable option for light products.

Clear and flocked trays where the product must be visible.

Your Trusted Custom Packaging Manufacturer

One-stop custom packaging service from design to global delivery — ISO 9001 certified, 100% recyclable materials, samples in 3–5 days

End-to-End Service

From concept development and structural design to sampling and mass production — all under one roof

100% Recyclable Materials

All materials are eco-friendly, supporting circular economy and carbon-neutral goals

Rapid Turnaround

Samples ready in 3–5 days. Accurate quote within 8 hours of design confirmation

10+ Years of Expertise

Serving 50+ countries with a professional team and 3M+ annual production capacity

Free Design Support

Professional structural design and graphic design recommendations at no extra cost

ISO 9001 Certified

Rigorous quality management system ensures consistent excellence across every batch

eco logo

Work with Us

At Ecofriendpack, we believe in building strong partnerships that drive mutual success. Whether you’re looking to source eco-friendly packaging solutions or collaborate on innovative projects, we’re here to help.

Email Us

layne@ecofriendpack.com

Call Us

WhatsApp: +86 13559252073

REQUEST A QUOTE

Share your requirements, and we’ll provide tailored solutions at competitive prices.

Contact Info
Project Info
EcoFriendPack custom packaging inquiry popup

REQUEST A QUOTE

Share your requirements, and we'll provide tailored solutions at competitive prices.

Contact Info
Project Info