Ecofriendpack logo
Ecofriendpack

Eco-friendly Box Design and Production

Custom Cardboard Inserts

Folding card trays and corrugated fitments die-cut from FSC board. The cheapest way to stop a product moving, and the only insert that recycles with the box.

Custom Cardboard Inserts​

Paper Doing the Work of Foam

A cardboard insert is a flat blank that folds into a platform, a tray or a set of blocks. Cut and crease it correctly and it holds a product as firmly as foam at a fraction of the cost — and because it is the same material as the carton, the customer never has to separate anything before recycling.

The limit is weight and shock. Card holds a bottle upright and stops it rattling; it does not absorb a two-metre drop the way closed-cell foam does. For most retail products under about 2 kg that trade is worth making, which is why card is the insert we quote most often.

  • Folding card tray — a single blank that folds into a platform with a cavity hole; the cheapest insert we make.
  • Corrugated fitment — E-flute or B-flute blocks that hold corners and carry more load than folding board.
  • Card and foam hybrid — a card platform over a thin foam layer when the product needs presentation plus protection.

Four Card Constructions

All four come off the same die-cutting line. The difference is the board, the fold pattern and how much assembly the packer accepts.

Folding platform

A creased blank that folds up into a platform with a die-cut cavity. Ships flat, assembles in one motion, and costs the least per unit.

Corrugated fitment

E-flute or B-flute blocks and corner pieces that carry heavier products. Stronger than folding board but bulkier to store flat.

Two-piece cradle

A base and a top that close around a bottle or jar. Holds both ends, so tall products cannot lean in transit.

Card over foam

A printed card platform on a 5–10 mm foam layer. Keeps the recyclable look while adding the impact absorption card cannot give.

Card vs Foam vs Pulp vs Plastic

Card is the cheapest and the most recyclable; it is also the least protective. Most products sit on the right side of that line.

Card platformEPE foamMolded pulpPlastic tray
Unit costCheapestLowLow at volumeHighest
ToolingDie onlyDie onlyMould per shapeMould per shape
Tooling lead time3–5 days3–5 days10–15 days7–10 days
ProtectionPositioning, no impact absorptionHighMediumHigh but rigid
RecyclingPaper stream, curbsideSpecialist points onlyPaper stream, curbsidePET yes, PVC no
StorageShips flat, assembles at packingShips as a solid blockNests but bulkyNests but bulky
Best forLight products, gift sets, cosmeticsFragile and heavyEco-led brandsRetail display

Cardboard Insert Specifications

No mould, so a shape change costs a new die rather than a new tool — which is why cardboard inserts suit products that are still being refined.

Board300–450 gsm folding carton board; 600–1,200 gsm greyboard for platforms
CorrugatedE-flute (1.5 mm) or B-flute (3 mm) for load-bearing fitments
CuttingFlatbed die cutting, creasing, perforating
Tolerance±0.5 mm on cut and crease lines
PrintingOffset CMYK or Pantone, or unprinted kraft
AssemblyShips flat; hand-folded at packing or pre-glued on request
ToolingSteel die, 3–5 days
Minimum order1,000 units
SamplingFree white sample so you can test fit and fold before print
Production20–30 days after sample approval
SustainabilityFSC-certified board, recycled stock, curbside recyclable, no plastic
Cardboard Insert Specifications​

Which Board

Board grammage for cardboard inserts is decided by the load and by how many times the packer will fold it.

300–450 gsm white card paper

Folding carton board

300–450 gsm. Creases cleanly, folds into platforms and cradles, and prints to retail standard. The default for products under 1 kg.

Greyboard

Greyboard

600–1,200 gsm. Rigid and flat, used as a base under foam or as a heavy platform for bottles. Usually wrapped or printed one side.
Corrugated Board​

E-flute and B-flute

Corrugated blocks and corner fitments. B-flute carries the most load; E-flute keeps a smoother printable face.

Where Card Inserts Win

Cardboard inserts suit products that need positioning more than they need cushioning.

  • ✓Bottles and jars under 1 kg
  • ✓Cosmetics and skincare sets
  • ✓Tea, coffee and food gift packs
  • ✓Candles and diffusers
  • ✓Stationery and pen sets
  • ✓Small electronics accessories
  • ✓Subscription box contents
  • ✓Retail multipacks
gift box with cardboard insert

Cutting and Finishing

With cardboard inserts the fold pattern is the product; everything else is decoration.

Flatbed die cuttingCreasing and scoringPerforationKiss cutOffset printingPantone spot colourMatte or gloss varnishFinger notchRibbon pullPre-gluing

From Blank to Platform

The white sample matters more on cardboard inserts than on any other insert — fold geometry is easy to get wrong on screen.

01

Send the product

Dimensions and weight. We propose a fold pattern and a board weight.

02

Test the white sample

An unprinted insert so you can load the product, fold it and check the lid clearance.

03

Print and proof

Artwork placed on the die layout, with a colour proof before the run.

04

Produce and ship

20–30 days after approval, delivered flat with the cartons.

Cardboard Insert FAQ

For bottles up to about 1 kg, yes — a two-piece cradle or a folding platform with a die-cut hole holds the base and stops it leaning. Above that we switch to B-flute corrugated blocks or add a foam layer. The failure mode to watch is not the board breaking but the cavity stretching and letting the bottle tilt.

No by default. Card inserts ship flat, which is the whole point — they take a fraction of the freight volume of foam. The packer folds them at the packing table, usually in one motion. If your volume justifies it, we can pre-glue so the platform arrives ready to load.

Yes, and this is where card beats every other insert. The platform is part of the unboxing, so it can carry a logo, a message, care instructions or a QR code at no extra material cost. Offset CMYK and Pantone spot colours are both available.

Typically 30–50% cheaper at the same quantity, because there is no foam block to cut and the blank ships flat. The saving shrinks when the product needs real impact protection, since at that point card alone will not do the job.

Yes, in normal paper recycling, and it needs no separation from the carton. If the insert is laminated to foam, the two have to be pulled apart — which is why we usually recommend an un laminated card platform for eco-led brands.

1,000 units, produced in 20–30 days after sample approval. Dies take 3–5 days, so a printed insert from artwork to delivery is typically 30–35 days.

Related Inserts

Compare all four families before choosing a material.

When the product needs impact absorption, not just positioning.

Moulded fibre trays with a stronger eco story than card.

Clear trays where the product must be visible on shelf.

Your Trusted Custom Packaging Manufacturer

One-stop custom packaging service from design to global delivery — ISO 9001 certified, 100% recyclable materials, samples in 3–5 days

End-to-End Service

From concept development and structural design to sampling and mass production — all under one roof

100% Recyclable Materials

All materials are eco-friendly, supporting circular economy and carbon-neutral goals

Rapid Turnaround

Samples ready in 3–5 days. Accurate quote within 8 hours of design confirmation

10+ Years of Expertise

Serving 50+ countries with a professional team and 3M+ annual production capacity

Free Design Support

Professional structural design and graphic design recommendations at no extra cost

ISO 9001 Certified

Rigorous quality management system ensures consistent excellence across every batch

eco logo

Work with Us

At Ecofriendpack, we believe in building strong partnerships that drive mutual success. Whether you’re looking to source eco-friendly packaging solutions or collaborate on innovative projects, we’re here to help.

Email Us

layne@ecofriendpack.com

Call Us

WhatsApp: +86 13559252073

REQUEST A QUOTE

Share your requirements, and we’ll provide tailored solutions at competitive prices.

Contact Info
Project Info
EcoFriendPack custom packaging inquiry popup

REQUEST A QUOTE

Share your requirements, and we'll provide tailored solutions at competitive prices.

Contact Info
Project Info