Custom Tuck Top Auto Bottom Boxes
A tuck lid over a pre-glued auto-lock base: the box arrives flat, you squeeze the sides, and the bottom locks itself. Built for products heavy enough to fall through a standard tuck.
What an Auto Bottom Actually Does
An auto bottom — also called a 1-2-3 bottom or crash-lock base — is a folding carton whose base is glued at the factory. The box still ships flat, but when you push the side walls apart the base folds down and locks into a double-thickness floor without anyone touching it. The lid stays a plain tuck, so opening and closing behaves exactly like a standard tuck carton.
That single change is why auto-bottom cartons are the default for candles, jars, bottles and gift sets. A friction-fit tuck base holds roughly 500 g before it starts to bow. A locked auto bottom carries several kilos, and it does so without tape, staples or a separate insert.
- Set-up speed — one squeeze per box, so a two-person packing team can build 400–600 boxes an hour without a machine.
- Load capacity — the glued base spreads weight across a double wall instead of a fold line.
- No extra parts — nothing to assemble, nothing to lose, nothing to tape at the packing table.
Four Auto-Bottom Configurations
The base is the same in all four. What changes is what happens above it — the lid, the panels and the extras that make the carton fit a specific retail shelf.
Standard tuck top
Dust flaps
Die-cut window
Hang tab
Auto Bottom vs Snap Lock vs Plain Tuck
Three bases, three trade-offs. If your product is under 500 g the plain tuck is cheaper; above that the base has to change.
| Auto bottom (1-2-3) | Snap lock bottom | Plain tuck base | |
|---|---|---|---|
| Factory glue | Yes — base pre-glued | No glue, folds and locks by tab | No glue |
| Set-up | One squeeze, base locks itself | Fold base, press tabs, stand up | Fold four flaps by hand |
| Typical load | 2–5 kg depending on board | 1–3 kg | Up to ~500 g |
| Base strength | Double wall, strongest | Reinforced but single wall | Friction fit only |
| Freight | Ships flat but bulkier than snap lock | Ships flattest | Ships flat |
| Best for | Candles, jars, bottles, gift sets | Supplements, tea, hardware, fragile items | Cosmetics, tea singles, light retail |
| Relative cost | Highest | Middle | Lowest |
Tuck Top Auto Bottom Specifications
Tuck top auto bottom boxes are cut to your product dimensions. No mould fee, no dieline charge, and the structural sample is free.
| Structure | Tuck top lid with factory-glued auto-lock base (1-2-3 bottom) |
| Dimensions | Fully custom length × width × depth |
| Board | 16–24 pt SBS or kraft; E-flute and B-flute for heavier contents |
| Printing | Offset CMYK or up to 8 Pantone spot colours, inside and outside |
| Finishes | Matte or gloss lamination, soft-touch, spot UV, foil, emboss, deboss |
| Extras | Dust flaps, die-cut window, hang tab, tear strip, insert platform |
| Minimum order | 1,000 units |
| Sampling | Free white sample and 3D mockup; printed sample on request |
| Production | 20–30 days after sample approval |
| Sustainability | FSC-certified board, recycled stock, water-based glue, plastic-free options |
What the Base Needs From the Board
The base carries the load, so board choice is driven by weight rather than by print. These three stocks cover the range.
18–24 pt SBS
Kraft, 18–24 pt
E-flute or B-flute
Products That Need a Locked Base
Anywhere the weight sits on the bottom panel rather than the walls, tuck top auto bottom boxes earn their cost.
- ✓Candles and wax melts
- ✓Glass jars and bottles
- ✓Gift sets and hamper cartons
- ✓Skincare sets with heavy glass
- ✓Small appliances and electronics
- ✓Coffee and tea gift packs
- ✓Bath and body products
- ✓Subscription box hero items
Printing and Finishing
The base is structural; the print is what sells. Both are handled on the same order.
How the Order Runs
The only difference from a plain carton is the sample stage — the base has to be tested with your actual product weight.
Share product weight
Dimensions plus the filled weight. That number decides board thickness and whether the base needs a double glue line.
Test the base
We cut a white sample and load it to your weight so you can confirm nothing bows or drops through before design starts.
Proof the artwork
Prepress sets your files on the dieline and returns a 3D mockup and colour proof.
Produce and ship
20–30 days after approval, shipped flat and palletised with a QC report.
Auto Bottom FAQ
It means the base is glued at the factory and folds itself shut when you open the carton out. You receive the box flat; pushing the side walls apart makes the bottom drop into place and lock. Nothing needs to be assembled or taped, which is why packing lines prefer it for volume.
Roughly three to four times faster by hand. A plain tuck base needs four flaps folded in sequence and held while the product goes in; an auto bottom is one squeeze and it is ready. On a run of 5,000 units that difference is usually a full shift of labour.
In 18 pt SBS, about 2 kg comfortably; 24 pt SBS or E-flute takes 4–5 kg. The limit is not the lid but the glue line at the base, so tell us the filled weight and we will spec the board and glue width to suit it.
Slightly. The blank is thicker when folded than a snap-lock carton, so a pallet holds perhaps 10–15% fewer units. Against that, it removes tape, labour and the risk of a base failing in transit, which is usually the larger cost.
Yes. The base uses a water-based adhesive on paperboard, which standard paper mills accept. Avoid full-surface film lamination if the carton needs to go into a plastic-free stream — we can use water-based coating instead.
1,000 units per size and structure, with production running 20–30 days after you approve the sample. Rush scheduling is possible on most board grades if you tell us the deadline at quote stage.
Related Structures
The parent structure — straight and reverse tuck cartons for lighter retail products.
The full folding carton range, including seal end and sleeve styles.
Inserts, tissue, ribbon, stickers and more — order accessories alongside your cartons.
Your Trusted Custom Packaging Manufacturer
One-stop custom packaging service from design to global delivery — ISO 9001 certified, 100% recyclable materials, samples in 3–5 days
End-to-End Service
From concept development and structural design to sampling and mass production — all under one roof
100% Recyclable Materials
All materials are eco-friendly, supporting circular economy and carbon-neutral goals
Rapid Turnaround
Samples ready in 3–5 days. Accurate quote within 8 hours of design confirmation
10+ Years of Expertise
Serving 50+ countries with a professional team and 3M+ annual production capacity
Free Design Support
Professional structural design and graphic design recommendations at no extra cost
ISO 9001 Certified
Rigorous quality management system ensures consistent excellence across every batch
Work with Us
At Ecofriendpack, we believe in building strong partnerships that drive mutual success. Whether you’re looking to source eco-friendly packaging solutions or collaborate on innovative projects, we’re here to help.
Email Us
layne@ecofriendpack.com
Call Us
WhatsApp: +86 13559252073
REQUEST A QUOTE
Share your requirements, and we’ll provide tailored solutions at competitive prices.
